high strength concrete with foundry sand
high strength concrete with foundry sand
Zhengzhou, Henan China
24 hours At your service

high strength concrete with foundry sand

High Strength of Concrete by Using Foundry Sand as Fine ...

the foundry sand as partial replacement of fine aggregate in concrete. The low-cost high strength concrete is prepared by using these materials. 1.1 Foundry sand When Foundry sands are generally classified as: Green sand and Silica sand. Both types of sands are suitable for beneficial use but they have different physical and environmental char-

More

Re-usage of waste foundry sand in high-strength concrete

In this study, the potential re-use of waste foundry sand in high-strength concrete production was investigated. The natural fine sand is replaced with waste foundry sand (0%, 5%, 10%, and 15%). The findings from a series of test program has shown reduction in compressive and tensile strengths, and

More

Re-usage of waste foundry sand in high-strength concrete ...

Aug 01, 2010  The high replacement of the blended foundry sand caused a reduction in strength as compared with concrete incorporating white sand or waste foundry sand. Naik et al. (2004) studied the influence of waste foundry sand as well as fly ash and bottom ash on the compressive strength of bricks, blocks, and paving stones.

More

Developing Sustainable Ultra High Strength Concrete ...

Developing Sustainable Ultra High Strength Concrete Mixtures Using Spent Foundry Sand 345 classification achieved through chemical analyses and particle size. The research conducted by Prabhu, G. G. et al. (from a cast iron plant) showed that the main source of foundry waste is molding sand (360 t/d). The remaining are from molds from dust

More

High Strength Concrete With Foundry Sand

High Strength Concrete With Foundry Sand. Utilization of Foundry Waste Sand in the Preparation of . Utilization of Foundry Waste Sand in the Preparation of Concrete Xerses N. Irani1, Suresh G. Patil5 Ramesh Patil2, Yuvaraj3, Vivekanand S.C4 1,2,3,4 (UG Student . Get Price.

More

Re-usage of waste foundry sand in high-strength concrete ...

Abstract. In this study, the potential re-use of waste foundry sand in high-strength concrete production was investigated. The natural fine sand is replaced with waste foundry sand (0%, 5%, 10%, and 15%). The findings from a series of test program has shown reduction in compressive and tensile strengths, and the elasticity modulus which is ...

More

High Strength of Concrete by Using Foundry Sand as Fine ...

the foundry sand as partial replacement of fine aggregate in concrete. The low-cost high strength concrete is prepared by using these materials. 1.1 Foundry sand When Foundry sands are generally classified as: Green sand and Silica sand. Both types of sands are suitable for beneficial use but they have different physical and environmental char-

More

Developing Sustainable Ultra High Strength Concrete ...

This study presents the development of ultra high strength concrete (UHSC) that has been made more sustainable by using both local materials from central Texas and spent foundry sand (FS) from the metal casting industry, which has also been obtained locally.

More

Strength behaviour of foundry sand on modified high ...

Sep 06, 2016  In the present work, fine aggregate is replaced by foundry sand with percentages and tests were performed for hardened properties of modified high strength concrete for all replacement levels. Keywords: Waste Foundry Sand, physical properties, chemical properties, compressive strength, splitting tensile strength and flexural strength

More

Strength Properties of Concrete Incorporating Foundry Sand ...

Foundry sand is high quality silica sand with uniform physical characteristics. Foundries attempt to reuse as much of sand as possible within the foundry process itself, but eventually a fraction becomes spent and ... It is evident from Fig. 10 that cube compressive strength of concrete

More

A Comparative Study of High Strength Concrete Properties ...

Foundry Sand. reused in foundry. At the point when this sand can never again Keywords: Compressive strength, Workability, High strength Concrete. 1. Introduction Concrete is a noteworthy development material that is utilized around the world, due to its extensive strength than other development materials. In any case, now daily there is a

More

Mechanical Properties of Ultra-High Performance Concrete ...

The new generation concrete, ultra-high performance concrete (UHPC), has high compressive strength exceeding 120 N/mm2 [17–19], or according to other references 150 N/mm2 [20–22]. Ultra-high performance concrete (UHPC) is considered a very durable material due to its very high strength-to-weight ratio compared to conventional concrete [18].

More

STRENGTH AND DURABILITY CHARACTERISTICS OF

Keywords— foundry sand, metakaolin , compressive strength , split tensile strength, flexural strength. _____ 1. I. NTRODUCTION. The current area of research in the concrete is introducing foundry sand in the ordinary concrete. Foundry sand is high quality silica sand with uniform physical characteristics. It is

More

An experimental study on high performance concrete

To evaluate the high strength concrete compressive strength, split tensile strength, and flexural strength have been studied in this investigations. Materials: High performance concrete was made of cement, sand, fly ash, GGBS, foundry sand, aggregate, water and chemical admixture.

More

Evaluation of Concrete Compressive Strength by ...

Evaluation of Concrete Compressive Strength by incorporating Used Foundry Sand Abstract: - The main objective of this study was to evaluate the compressive strength of concrete by utilizing three types of used foundry sand; with bentonite clay, with sodium silicate with phenolic resin as partial replacement of fine aggregates.

More

Effect of Industrial Waste Foundry Sand as Fine Aggregate ...

2) Substitution of 30% of foundry sand results decrease in compressive strength for M20 M30 grade of concrete when compared to mixes with natural sand 3) Substitution of 20% (A2) foundry sand in M20 grade concrete 10% (A1) foundry sand in M30 grade concrete gives better results. 3 h 3.5 Percentages of F.S

More

Re-usage of waste foundry sand in high-strength concrete ...

Mar 09, 2010  In this study, the potential re-use of waste foundry sand in high-strength concrete production was investigated. The natural fine sand is replaced with waste foundry sand (0%, 5%, 10%, and 15%). The findings from a series of test program has shown reduction in compressive and tensile strengths, and the elasticity modulus which is directly ...

More

2018 JETIR April 2018, Volume 5, Issue 4 A REVIEW ON ...

B. acel Guney, Yasin Dursun Sari, and Musin Yalcin Re-use of waste foundry sand in high-strength concrete, Waste Management 30 (2010) 1705-1713 In this study, re-use of waste foundry sand in high-strength concrete production was investigated. The natural fine sand is replaced by waste foundry sand by 0%, 5%, 10%, 15% percentage.

More

Re-usage of waste foundry sand in high-strength concrete ...

Main Waste Management Re-usage of waste foundry sand in high-strength concrete. Waste Management 2010 Vol. 30; Iss. 8-9. Re-usage of waste foundry sand in high-strength concrete Yucel Guney, Yasin Dursun Sari, Muhsin Yalcin, Ahmet Tuncan, Senayi Donmez.

More

(PDF) IRJET-EXPERIMENTAL INVESTIGATION ON HIGH VOLUME

High volume fly ash concrete mixes are concrete mix in split tensile strength was maximum at prepared by incorporating foundry sand as fine F30 mix at 28, 90, and 365 days. The obtained results has aggregate sand with different percentages (0%, 25%, enabled foundry sand can be used as construction 50%, 75%, 100%) respectively.

More

(PDF) STRENGTH BEHAVIOUR OF FOUNDRY SAND ON MODIFIED HIGH ...

IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 pISSN: 2321-7308 STRENGTH BEHAVIOUR OF FOUNDRY SAND ON MODIFIED HIGH STRENGTH CONCRETE Jayachandra1, Shashi kumar.A2, Sanjith.J3, DG.Narayana4 1 Post Graduate student, Department of Civil Engineering, S.J.C.I.T, chickballapura, Karnataka, India 2 Assistant Professor,

More

Re-usage of waste foundry sand in high-strength concrete ...

Mar 09, 2010  In this study, the potential re-use of waste foundry sand in high-strength concrete production was investigated. The natural fine sand is replaced with waste foundry sand (0%, 5%, 10%, and 15%). The findings from a series of test program has shown reduction in compressive and tensile strengths, and the elasticity modulus which is directly ...

More

Compressive and Flexural Strength Property Enhancement for ...

“Development of high strength concrete using waste foundry sand” Journal of Chemical and Pharmaceutical Sciences, JCPS Volume 10 Issue 1 January - March 2017, jchps. [6]Devi Prasad and A. Matha Prasad (2017).

More

Prediction of High Compressive Strength of Concrete

Prediction of High Compressive Strength of Concrete using Waste Foundry Slag and Alccofine by NDT Devinder Sharma1 ... content in concrete. The maximum size of sand was taken 4.75 mm and minimum size was 150 micron. Testing of ... with UPV and RN of high strength concrete specimens at 28 days. Results showed increase in UPV and RN with

More

Compressive and Flexural Strength Property Enhancement for ...

study on the possessions of concrete by using foundry sand as replacement of fine aggregate in high strength concrete (HSC). In this review it was found that replace-ment of sand by foundry sand by certain initial percent-ages gives a marginal increase in hardened properties of normal strength concrete. Annexation of foundry sand

More

Ultra High Strength Concrete Using Economical Materials

suitable to be used in casting ultra high strength concrete UHSC. Physical properties of the used sand are given in Table (1) and its grading is shown in Table (2) and Fig. (1). Sand was sieved over sieve of size 0.6mm to discard any impurities. Silica fume: It is a waste by-product of silicon and silicon

More

Investigation into the Heat of Hydration and Alkali Silica ...

Jul 02, 2017  A sustainable, high strength concrete mixture using waste foundry sand was investigated in this study. Mechanical properties, hydration reactivity, and alkali silica reactivity were monitored on two series of UHSC mixtures blended with spent foundry sand up to 30% replacement of fine aggregate by volume.

More

Durability study of concrete using foundry waste sand

strength satisfying the strength requirements of M20 grade of concrete was used for the final castings. The mix proportion are given in Table3. Table3: Finalized mix proportions for locally available sand, weathered sand and burnt black sand for M20 grade concrete. Casting

More

Effects of Fly Ash and Foundry Sand on Performance of ...

Jul 07, 2012  On the basis of strength and durability evaluations, it was concluded that both nonair and air-entrained concrete mixtures developed in this investigation are appropriate for manufacture of high-quality, high-durability architectural precast concrete using used foundry sand and fly ash.

More

STRENGTH AND DURABILITY PROPERTIES OF HIGH

Mixture proportions and casting of specimen A control concrete mixture (M-1) was designed as per as per the guidelines specified in ACI 211.4R-08 - “Guide for selecting proportions for high strength concrete with portland cement and other cementations materials”(2008) [30] to have 28 day compressive strength of 60 MPa. Five more concrete ...

More

EXPERIMENTAL INVESTIGATION ON STRENGTH PROPERTIES

ash gives reduction in strength for all proportions. Also found that, increase in the replacement of GGBS by Bagasse Ash gives decrease in the strength. The results show that Foundry sand can be replaced fully for fine aggregate in Geopolymer concrete. Keywords: GGBS, Geopolymer Concrete, Foundry sand, Bagasse Ash 1. INTRODUCTION

More

Foundry Sand User Guidelines - University of Wisconsin ...

Foundry sand is high-quality uniform silica sand that is used to make molds and cores ... properties of foundry sand for use in Portland cement and concrete, hot mix asphalt, road subbase layers, embankments, and flowable fill. ... primarily due to strength issues.

More

Mechanical Properties of Ultra-High Performance Concrete ...

Waste foundry sand (WFS) is a ferrous and non-ferrous foundry industry by-product, produced in the amount of approximately 700 thousand tons annually in Poland and it is estimated that only a small percentage of this waste is recycled. The study used WFS to produce ultra-high performance concrete (UHPC) as a partial substitute for quartz sand. It was replaced with WFS levels of 0%, 5%, 10% ...

More

Different Grades of Concrete, Their Strength and Selection ...

Grade of concrete is denoted by prefixing M to the desired strength in MPa. For example, for a grade of concrete with 20 MPa strength, it will be denoted by M20, where M stands for Mix. These grade of concrete is converted into various mix proportions. For example, for M20 concrete, mix proportion will be 1:1.5:3 for cement:sand:coarse aggregates.

More